- DVOP-HP-VHF1-E1 Network-to-hdmi extender
The net-to-HDMI device replaces the HDMI cable with a CAT5e or CAT6 cable (recommended) to reduce the cost, and the purpose of the extender is to achieve long-distance signal transmission with a low cost cable.
The company manufactures equipment that provides solutions for applications such as locations with limited noise, transmission distance and security, data center control, information distribution, conference room presentations as well as teaching environments and corporate training sites.
● Support HDMI 1.4A version
● 3D video format is supported
● Support up to 1080P/60Hz resolution
● Support the maximum speed of 1.65Gbps. TMDS clock maximum bandwidth of 165Mhz
● Support 8/10/12 bit dark colors
● Support standard AWG26 cable, input transmission distance up to 15 meters, output transmission distance up to 20 meters
● Signal transmission: use a cat5 or cat6 cable (recommended) instead of the HDMI cable, the cable between the receiver and the transmitter can be up to 60 meters
● Requires a 5V/1A power adapter
Support audio format input DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD
HDMI output 60 fs / 1080 p / 1080/24/50 I / 720 p / 576 p / 576 I / 480 p / 480 I
Support audio format output DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD
The maximum transmission bandwidth is 165MHz
The maximum transmission rate is 1.65Gbps
Input video signal 0.5~1.5Volts p-p
Output DDC signal 5Volts p-p (TTL)
Input an HDMI cable length ≤15m AWG26 Standard HDMI cable
Output HDMI cable length ≤20m AWG26 Standard HDMI cable
Maximum working current TX 510mA
Maximum working current RX 100mA
Power adapter specifications AC input (50HZ, 60HZ) 100V-240V; Dc output 5V/1A
Operating temperature range (-15 to +55℃)
Operating humidity range 5 to 90%RH (non-condensing)
Dimensions (L x W x H) 81x43x22 (mm)
TX weighs 100g
The RX weighs 120g
