ProductsCurrent location :Home > Products
DVOP-EN-I-P1-EM1 Industrial 1 electrical ONU optical network unit

DVOP-EN-I-P1-EM1 is an EPon-based ONU (Optical Network Unit) device with full core intellectual property rights. This series can provide a 10/100M network port with a PON uplink interface to connect to the local device through optical fiber. Fully comply with IEEE802.3-2005 and China Telecom EPON equipment technical requirements V2.1, can provide users with broadband, voice, IPTV, CATV and other integrated service access, with carrier-grade operation, management, easy maintenance characteristics, to provide customers with high-speed data services. It adopts a unified open software and hardware architecture, and has carrier-grade operable, manageable and easy to maintain characteristics.

DVOP-EN-I-P1-EM1 provides two categories of products applied to FTTB/FTTF and FTTH, and can provide three-in-one terminal products launched with built-in FTTC+EOC networking to provide integrated business solutions of EPON\EOC\HFC for radio and television users. This series of ONU can form an efficient EPON solution, which is a carrier-grade FTTH/FTTB/FTTF broadband access equipment for telecom, radio and television operators and smart cities, smart communities, smart buildings, IPTV, etc. It has the characteristics of high integration, flexible application, high reliability, quality of service (QoS) guarantee, management, flexible expansion and networking.


● Comply with IEEE802.3-2005 standard and CTC V2.1 technical requirements

● Supports Layer 2 switching of Ethernet services and line-speed forwarding of upstream and downstream services

● Support frame filtering and suppression

● Support standard 802.1Q Vlan function, support VLAN conversion

● Support 4094 vlans (802.1Q)

● Support dynamic bandwidth allocation (DBA)

● Support QoS, including traffic classification, priority marking, queuing and scheduling, traffic shaping and traffic control

● IGMP Snooping is supported

● Support Ethernet port speed limiting, loop detection, Layer 2 isolation

● Power failure alarm is supported

● Support remote reset and restart

● Support to restore factory parameters

● Data encryption is supported

● Support status detection and fault reporting functions

● Support lightning protection for power supply and service port

● Optional CATV RF module, supporting broadcasting EOC


1. Optical port indicators

Wavelength: 1310nm

Fiber output power: -1.0 to +4dBm

Optical port speed: 155M/1.25Gbps

Receiving sensitivity: -26dBm

Transmission distance: single mode 100 megabits: 0-120Km; Gigabit: 0-80km

Maximum optical power reserved: 15dbm/20dbm/25dbm/30dbm

Optical interface type: SC/PC,SC/APC (CATV ONU)

2. Ethernet interface specifications

Physical interface: Standard RJ45

Interface rate: 10/100M or 10/100/1000M adaptive, full duplex/half duplex

Interface standards: IEEE802.310Base-T, IEEE802.3u 100Base-TX

Flow control: IEE802.3X/IEE802.3Z full duplex flow control and half duplex flow control

Interface sequence: adaptive MDI/MDIX direct connection and cross-connection mode

3, appearance size, power supply mode and power dissipation

Power supply: AC: input 90 ~ 240V; Dc: Input -36V to -72V

Maximum power consumption: 0.2A/220V; 0.6 A / 48 v

Feed protection: overload protection 1+1 Hot spare protection 1+1 Hot spare protection

Related Products
Pre:DVOP-EL-P16-EG4-OG4-OQ2 16口万兆OLT 线路终端
Next:DVOP-EN-I-P1-EM4 Industrial grade 4 electrical ONU optical network unit
Application
Smart City
Safety Precaution
Highway
Rail
Power Supply
Products
Industrial Grade Switch
Industrial Smart Gateway
POE switch
Industrial Smart Cabinet
More >>
About Us
Company Profile
Company Culture
Development Path
Success Case
Certifications
News
Company News
Industry News

    Hot Line:

    0755-26511495

  • Technical Support: 18148556692

展开