- DVOP-IN-IM3-EG24-OQ4 10 Gigabit 4 optical 24 Gigabit power Layer 3 managed network switch
DVOP-IN-IM3-EG24-OQ4 is Shenzhen Guangxiang intelligent management three-layer Ethernet Fibre Channel switch with complete intellectual property rights. The product is based on high-performance ASIC chip technology and adopts modular structure design. Provides 24 10/100/1000M RJ45 electrical ports, four 1G/10G SFP+ optical ports, and one Console management port to provide sufficient bandwidth for aggregation and core data exchange. Provides high capacity exchange capability. Improved security control policy and CPU protect policy improve fault tolerance, ensure stable network operation and link load balancing; The device supports automatic DoS attack defense, SNMP, IEEE 802.1, spanning tree and fast spanning tree protocol, and link aggregation.
DVOP-IN-IM3-EG24-OQ4 supports a variety of network management methods, such as: SNMP, Web browser, Telnet and RS232 console management. It has rich network management functions, such as 802.1Q VLAN, 802.1p QoS, IGMP static multicast, port aggregation, port mirroring, port configuration, STP/RSTP/MSTP ring network protocols, FR-Ring, access control, remote monitoring, port statistics, network diagnosis, etc. All ports support non-blocking, full-line speed forwarding, providing you with strong data processing capabilities; Supports the line detection function to facilitate line troubleshooting, and has 32Kbps fine-grained port bandwidth control, which can accurately control the receiving and sending rates of each port according to different service requirements of different users, helping you allocate bandwidth resources reasonably and improve bandwidth utilization. Rich QoS control policies support priority modes based on port, 802.1p, IP TOS/DS, and TCP/UDP port numbers.
● 512Gbps backplane bandwidth
● Hardware routing, line speed Layer 3
switch packet forwarding rate of 192.56Mpps with 64K address table, 64MB queue
cache, static MAC address 1K
● Can be deployed in the MAN core and
provides several last 1km technologies to support multilevel stacked
applications
● Provides DOS, distributed denial of
service, spoofing and virus defense
● Supports CPU protection, which can limit
the attack of illegal packets on the CPU and protect the stable operation of
the switch in various environments. Supports IEEE802.1x, provides port-based
user authentication, network shield technology, security control technology and
policy control list to limit the maximum number of hosts connected to a port.
Ethernet interfaces are bound in multiple ways to increase bandwidth and
redundancy
● Powerful ACL, support L2-L4 data
filtering
● Support any combination of IP+MAC+PORT
binding, illegal frame filtering, hierarchical user management, password
protection, SSH V2 policy control list, and traffic regulation
● Can be managed through Web, SNMP and
other ways
● SNMP V1/V2/V3; RMON 1/2/3/9; Syslog;
Supports WEB NMS, RMON, and SSHV2
● MIB-II Supports VCT cable detection to
quickly locate network faults
● Support XModem protocol, software upgrade
through TFTP/ZMODEM and BootRom upgrade support SFP+, but also backward
compatible XFP, etc. to provide redundant power supply, fast failover and fast
connection, greatly increasing system reliability
● Powerful traffic and broadcast management
● Automatically detect and suppress
broadcast storm, support IGMP message detection, effectively limit the overflow
of broadcast messages
● Support full duplex mode and half duplex
mode flow control
● Support IGMP Snooping, IGMP, multicast
VLAN and other multicast protocols
● Support 1M step rate limit for Ethernet
interfaces
● Support 4K IEEE 802.1Q compliant vlans,
support port-based vlans and protocol-based vlans
● Advanced buffer management, support
802.1p protocol, 8 send queues per port map 802.1p 8 priorities
● Support IP multicast and QoS 4. Layer 3
management
● Support IPv4 and IPv6 Layer 3 routing
function
● Support RIP, OSPF,VRRP, BGP, ECMP and
other protocols
● IPv4 routing table: 8K; ARP entries: 4K
supports static routes, RIPV1/V2, and OSPF
|
Product model |
DVOP-IN-IM3-EG24-OQ4 |
|
Basic Features |
|
|
Fixed electrical ports |
24 10/100/1000M electrical ports |
|
Fixed optical ports |
Four 1G/10G SFP+ ports |
|
Console port |
1 |
|
Processor |
RISC 600MHz |
|
Flash capacity |
8MB |
|
Memory capacity |
64MB, up to 512MB |
|
MAC Address Table |
16K, address self-learning, support IEEE 802.1D standard |
|
VLAN |
4096 IEEE 802.1Q compliant vlans that support port-based vlans and protocol-based vlans |
|
Packet buffer |
64MB |
|
Swap parameters |
Priority queue :8, number of vlans :256, number of multicast groups :256, minimum bandwidth Qos:32K, backplane bandwidth: 512Gbps; Packet forwarding rate: 192.56Mpps; |
|
Product Features |
|
|
Spanning Tree |
Support STP, RSTP, MSTP, ERPS Support PVST/PVST+ |
|
VLAN |
Support for port-based VLAN 802.1Q tagging VLAN Support for Super Vlan Support for Private Vlan Support for GVRP Dynamic Vlan configuration Support for QinQ and flexible QinQ Support for Voice VLAN Support for 4K IEEE 802.1Q standard VLAN |
|
Flow control |
Standards-based IEEE 802.3x flow control uses IEEE 802.1Qbb priority to control flow to support CAR functionality |
|
Broadcast control |
Suppress the broadcast storm and reach a critical point to stop sending |
|
Multicast control |
IGMP Snooping automatically monitors multicast packets and multicast vlans |
|
Multicast routing |
IGMP v1/v2/v3, MLDv2PIM-SM , OLINK&PIM-DMDVMRP (Distance Vector Multipoint Broadcast Routing Protocol) GMRP (Multicast Dynamic Registration Protocol) 4K multicast groups |
|
Port bundling |
Each group has a maximum of 8 LACPs, and supports 128 dynamic LACPs or static aggregation |
|
Port mirroring |
Supports mirroring based on traffic classification and port mirroring |
|
DHCP Features |
Supports DHCP Server, DHCP Client and DHCP relay, supports DHCP Snooping, supports binding based on MAC address , and supports shielding of illegal DHCP servers |
|
NAT function |
Supports static or dynamic NAT address translation |
|
Security Features |
IEEE 802.1x Port authentication, PKI authentication Port Security (Secure port) function Hardware support IP ACL, MAC ACL, Vlan ACL Hardware support port-based user IP+MAC+Vlan ID+ user account Combination Binding Support IP Source Guard Support WEB UI User authentication Remote RADIUS, TACACS+ authentication user hierarchical management and password protection Network Shield technology Security control technology policy control list |
|
Quality of Service |
IEEE 802.1Qau Congestion Mechanism 8 send queues per port Map 802.1p 8 priorities WRED, WFQ, SP and FIFO queue scheduling algorithms Best-Effort Service Differentiated Service Strict Priorty Weighted Round R obin) First come first served algorithm TOS re-labeled Traffic Shaping (RTS) |
|
Network management |
SNMP v1/v2/v3Telnet WEB interface Cluster management SSH Fans, temperature, system logs, and hierarchical alarms |
|
Physical Features |
|
|
Power supply characteristics |
Ac 110-240V adaptive, 47-63Hz, 1A/230V, 1+1 RPS power supply hot backup DC-48VDC /24VDC, support cross power supply hot backup |
|
Power |
Up to 15W |
|
Indicator light |
Power indicator, system indicator, connection/transceiver indicator |
|
Ambient temperature/humidity |
Run at -40-80 ° C, store at -40-85 ° C, 5-95% condensation free |
