- DVOP-IN-IR-EM6-OM2-SD Industrial rail loop network self-healing 100 Megabit 2 optical 6 electrical network switch
DVOP-IN-IR-EM6-OM2-SD series is an industrial Ethernet Fibre Channel switch with full intellectual property rights. The electrical port supports POE and non-POE and many other models. It adopts patented fast FR-Ring redundancy technology and has very low network fault self-healing time (<20ms). All interfaces adopt advanced bridge self-healing multi-stage lightning protection design, ESD up to 8KV in line with EN61000-4-2 standards, 4KV in line with EN61000-4-5 and other standards. DVOP-IN-IR-EM6-OM2-SD conforms to IPC standards, adopts industrial-grade design, adopts imported industrial-grade chips and devices, can run stabilities for a long time, is not affected by environmental interference, has high transmission quality, can work stabilities for a long time, installation and maintenance are simple, no debugging and other characteristics, electromagnetic compatibility meets the industrial level 4 standards. The device supports a variety of power supply environments, such as 220VAC/12VDC. The power supply has anti-reverse connection and 1+1 dual power supply hot backup is optional.
● With 2 100M optical interfaces, 6 10/100M self-applicable Ethernet ports.
● All network ports and power ports adopt advanced bridge self-healing multi-level lightning protection design, in line with EN61000-4-2~EN61000-4-6 series international protection standards.
● Electromagnetic compatibility in line with industrial level 4 standards, suitable for a variety of electromagnetic environment harsh occasions.
● Gold PCB board, with strong oxidation resistance, strong flow capacity, high long-term stability, suitable for harsh environment.
● The power interface supports anti-reverse connection and 1+1 dual power supply hot backup mode.
● Support a variety of network management methods, such as: SNMP, Web browser, Telnet and RS232 console management.
● Support command line interface (CLI), easy to quickly configure the main management functions
● Bandwidth management: Support port aggregation, port speed limiting, broadcast storm suppression
● Support IEEE 1588 PTP V2 (Precision Time Protocol) to achieve accurate network time synchronization.
● Support QoS and ToS/ DffServ for traffic control and management DHCP Opt on 82 is used to assign IP addresses with different policies.
● Support link aggregation to optimize bandwidth utilization.
● Support patent Ring protocol "FR Ring" (self-healing time <20ms), STP, RSTP, support SnMPv3, IEEE 802.1X, HTTPS and SSH, enhance network security MSTP Ethernet redundancy.
● Supports TACACS+, IGMP Snooping and GMRP to filter multicast traffic.
● Use RMOn to effectively improve network monitoring and forecasting capabilities.
● Support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocols, easy network planning.
● Support bandwidth management to ensure network stability.
● Port mirroring is supported.
● Support port locking based on MAC address to prevent illegal intrusion.
● Support Ethernet/ IP and Modbus/TCP protocols for device management and control.
● Support multicast and broadcast storm control.
● All ports support non-blocking, full-line speed forwarding, providing strong data processing capabilities.
● Extremely wide power supply range, supporting 220VAC/5VDC/12VDC and other power supply environments.
● Standard: IEEE802.3, IEEE802.3U, IEEE802.3X, IEEE802.3Z
● Support priority queue, provide quality of service assurance QoS.
● Support IEEE802.3x full duplex flow control/half duplex back pressure flow control.
● Support IEEE802.1Q VLAN Settings, support traffic control, effectively suppress broadcast storm.
● All electrical ports have automatic MDI/MDIX recognition and flip, adaptive full duplex/half duplex function.
● Adopt imported industrial chips and devices.
|
Optical index |
Wavelength: |
Single mode :1310/1550nm; DFB:1260~1610nm |
|
Fiber output power: |
0 dBm ~ -3 dBm/-5 dBm ~ -10 dBm |
|
|
Reception sensitivity: |
≤-28dBm |
|
|
Single wavelength bandwidth: |
155Mbps |
|
|
Transmission distance: |
Single mode: 100 Mbit: 0-120Km; Gigabit: 0-80km |
|
|
Maximum optical power reservation: |
15dbm/20dbm/25dbm/30dbm |
|
|
Fiber optic interface |
LC/SC/FC/ST Optional |
|
|
Network Port Indicators |
Physical interface: |
Standard RJ45 |
|
Interface rate: |
10/100M adaptive, full duplex/half duplex |
|
|
Network media: |
Category 5 and above unshielded twisted pair cables |
|
|
Forwarding method: |
Storage forwarding, all ports support line speed forwarding |
|
|
Network protocol: |
IEEE802.3, IEEE802.3x Flow Control, IEEE
802.3z, IEEE 802.3u, IEEE 802.3AB
, IEEE802.3x, IEEE 802.1D-2004 STP, IEEE 802.1w Rap d STP, IEEE 802.1Q VLAN
Tag
, IEEE 802.1p CoS, IEEE 802.1X Authentication, IEEE 802.3ad link aggregation
|
|
|
Flow Control: |
IEE802.3X/IEE802.3Z Full duplex flow control and half duplex flow control |
|
|
Line sequence: |
Adaptive MDI/MDIX direct connection and cross-connection mode |
|
|
Management protocol: |
FR Ring,IGMPv1/v2, GVRP, SNMPv1 /v2c/v3,
DHCP Cl ent, TFTP, SMTP, RMON, HTTP, HTTPS
, Telnet, Syslog, GVRP SSH, SNMP INform, LLDP, SNTP Server/Cl ent,PVLA
|
|
|
Exchange parameters: |
Priority queue :4, Number of vlans :256,
VLAN ID:1 ~ 4094, number of multicast groups :256, MAC table :8K
, packet buffer :1Mb t, packet forwarding rate :5.3Mpps, switching delay
:<5 μs
|
|
|
Power supply/Power |
Power supply method: |
5 VDC / 9 VDC / 12 dc / 24 VDC / 48 VDC / 220 vac is optional |
|
Maximum power consumption: |
<2A@5VDC |
|
|
Feed protection: |
Overload protection:
1+1 Hot spare protection:
Reverse switch protection: supported
|
|
|
Environmental Parameters |
Operating temperature: |
-30℃ ~ +70℃ |
|
Storage temperature: |
-45℃ ~ +85℃ |
|
|
Relative humidity: |
5 to 95% condensation free |
|
|
machine |
Enclosures: |
Naturally cooled, fanless, IP40 protection rating |
|
Installation method: |
Wall mount/desktop mount |
