- DVOP-HM-WR-ELM1-EWM1-DB1-G4WG-TJW Industrial 4G router
DVOP-HM-WR-ELM1-EWM1-DB1-G4WG-TJW is a high-performance 4G industrial router designed for wireless communication based on 4G/3G network requirements. It is mainly used in the data transmission business of industry users, supporting data transparent transmission, image transmission, equipment monitoring and wireless routing Internet access and other functions. Using high-performance 32-bit processor, it can process protocols and large amounts of data at high speed, compatible with mobile Unicom Telecom 4G/3G/2G network. Provides 10/100M Ethernet port, WIFI wireless interface, serial port. It can connect to various terminal devices. Supports WEB configuration, easy management, and remote SMS control.
DVOP-HM-WR-ELM1-EWM1-DB1-G4WG-TJW is equipped with 1 10/100M adaptive LAN electrical port, 1 10/100M adaptive WAN electrical port, 1 RS232/RS485 data, and 1 master/standby SMA interface. A multi-functional 4G wireless router with SMA interface and WIFI antenna interface, with optional GPS and modular structure. Supports 1+1 two hot spare power inputs and meets the IP40 protection level. The device supports an extremely wide power supply range of 9V~24V, and the power supply has redundant anti-reverse connection. All interfaces adopt advanced bridge self-healing multi-stage lightning protection design, ESD up to 8KV in line with EN61000-4-2 standards, lightning protection 4KV in line with EN61000-4-5 and other standards, electromagnetic compatibility to meet the industrial level four standards.
● Ultra-small size, length and width only 97 mm×78.2mm×25.1mm.
● Industrial protection interface, easy to install.
● SMA interface.
● Five-mode 13-frequency full Netcom 4G wireless, flexible architecture and choice of wireless operators according to the project site.
● Wide voltage DC9-24V power supply.
● Wired + wireless router solution
● Support 802.11b /g/n protocol, up to 300Mbps.
● Wired support 1WAN or 1LAN, 10M/100M adaptive.
● Moderate RF power consumption.
● Embedded firewall functions: Support MAC/IP address/port filtering, port mapping, port forwarding, URL filtering, DMZ and other firewall functions
● Optional GPS/ Beidou positioning module, which is convenient to establish a network-based resource management and monitoring system for virtual sites based on GIS.
● 1 way UART (232).
● Hardware and software watchdog anti-crash design, after the router is disconnected, it will automatically power off and restart to ensure stable and reliable operation of the equipment;
● Automatic detection of network disconnection, automatic restart of dial failure, timed restart and other functions
● Wide operating temperature range of -40℃ ~ 80℃, suitable for industrial applications under harsh temperature conditions.
● All network ports and power ports adopt advanced bridge self-healing multi-level lightning protection design, in line with EN61000-4-2~EN61000-4-6 series international protection standards.
● Fully enclosed design, meet the IP40 protection level.
● Electromagnetic compatibility in line with industrial level 4 standards, suitable for a variety of electromagnetic environment harsh occasions.
● Gold PCB board, with strong oxidation resistance, strong flow capacity, high long-term stability, suitable for harsh environment.
● Dual power supply 1+1 hot backup, power interface support redundant reverse connection.
● Support a variety of network management methods, such as: SNMP, Web browser.
● Full industrial design, using imported industrial chips and devices
|
Network port indicator |
Physical ports: |
Standard RJ45 |
|
Interface rate: |
10/100M adaptive, full duplex/half duplex |
|
|
Network media: |
Category 5 and above unshielded twisted pair cables |
|
|
Forwarding method: |
Storage forwarding, all ports support line speed forwarding |
|
|
Network protocol: |
IEEE802.3, IEEE802.3x Flow Control, IEEE 802.3z, IEEE 802.3U, IEEE 802.3AB, IEEE802.3x |
|
|
Flow Control: |
IEE802.3X/IEE802.3Z Full duplex flow control and half duplex flow control |
|
|
Line sequence: |
Adaptive MDI/MDIX direct connection and cross-connection mode |
|
|
4G port specifications |
Transmitting power |
Class 4(33dBm±2dB) for GSM900 Class 1(30dBm±2dB) for DCS1800 Class E2(27dBm±3dB) for GSM900 8-PSK Class E2(26dBm±3dB) for GSM1800 8-PSK Class 3(24dBm+3/-1dB) for CDMA BC0 Class 3(24dBm+1/-3dB) for WCDMA Class 2(24dBm+1/-3dB) for TD-SCDMA Class 3(23dBm±2dB) for LTE FDD Class 2(23dBm+1/-3dB) for LTE TDD |
|
Reception sensitivity |
FDD B1:-96dBm; FDD B3:-96dBm; FDD B5:-96dBm; TDD B8:-96.5dBm; TDD B38:-96dBm; TDD B39:-97dBm; TDD B40:-96.5dBm; TDD B41:-96dBm; WCDMA B1:-110dBm; WCDMA B8:-111dBm; TDSCDMA B34:-109dBm; TDSCDMA B39:-109dBm; GSM 900M:-109dBm; GSM 1800M:-109dBm |
|
|
LTE |
non-CA CAT4 Max support; Support 1.4~20MHz RF bandwidth; Downlink support multi-user MIMO; FDD: Max uplink speed 50Mbps, Max downlink speed 150Mbps; TDD: Maximum uplink rate 35Mbps, maximum downlink rate 130Mbps; |
|
|
WCDMA |
3GPP R8 DC-HSPA+; 16-QAM,64-QAM and QPSK modulation; Max uplink 5.76Mbps , Max. 42Mbps downlink |
|
|
TD-SCDMA |
CCSA Relese 3; Max uplink 2.2Mbps, Max downlink 4.2Mbps |
|
|
Interface mode |
SMA antenna interface |
|
|
WIFI |
Ports: |
SMA |
|
Transfer rate: |
300Mbps |
|
|
Frequency range: |
2.412 to 2.472 GHz |
|
|
Safe: |
WiFi Secure Access (WPA), WPA2, 128-bit WEP encryption and support for MAC address filtering |
|
|
Agreement: |
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
|
|
Power supply/Power |
Power supply method: |
12VDC |
|
Maximum power consumption: |
<1A@12VDC |
|
|
Environmental parameters |
Operating temperature: |
-40℃ ~ +80℃ |
|
Storage temperature: |
-45℃ ~ +85℃ |
|
|
Relative humidity: |
5 to 95% condensation free |
|
|
Mechanical |
Enclosures: |
Natural cooling, no fan, IP40 protection |
|
Size: |
94mm×78mm×25mm |
|
|
Installation method: |
Wall-mounted |
Software features:
|
1 |
Software Features |
Function Description |
|
2 |
Working mode |
3G\4G routing mode, Standard routing mode, and wireless relay mode |
|
3 |
Network backup function |
Support 4G priority wired network backup, wired priority 4G network backup |
|
4 |
HDCP |
Support for DHCP automatic IP assignment and static IP |
|
5 |
Supports APN and VPDN networks |
Supports APN/VPN private networks of the three major carriers |
|
6 |
VPN |
PPTP client support Support L2TP client (IPSECK is not currently supported) |
|
7 |
WEB Remote management |
1. Support DMZ hosting 2. Support port mapping 3. Support local 4. Support remote assistance 5. Support MAC address binding 6. Support static routing table |
|
8 |
DTU function |
Serial port server function Only serial port 232 is supported |
