- Industrial 4G router technical specification
- adopts industrial 32-bit high-speed processor, MIPS dual-core CPU, the main frequency up to 880MHZ
- Independent WIFI chip, 1200M
- 2.4G speeds up to 300Mbps and 5.8G speeds up to 867Mbps.
- uses high-speed 256MB DDR3 with 16MB Nor Flash
- 1 WAN and 3 Lans 1000 m adaptive network ports, supporting Auto MDI/MDIX
- Built-in M.2/PCIE standard port for connecting to 5G mobile communication modules
- External standard SIM card port, supporting SIM/USIM cards
- external high-gain omnidirectional antenna, wireless signal 360 degrees without dead Angle
- Industrial protection interface for easy installation.
- Wide voltage DC9-24V power supply.
- Embedded firewall functions: Supports MAC/IP address/port filtering, port mapping, port forwarding, URL filtering, DMZ firewall functions
- Optional GPS/ Beidou positioning module, which facilitates the establishment of a GIS-based virtual site network resource management and monitoring system.
- One UART (232).
- Software and hardware watchdog anti-crash design, the router will automatically power off and restart when the network is disconnected, to ensure the stable and reliable operation of the equipment;
- Network disconnection automatic detection, dial failure automatic restart, timed restart and other functions
- -40℃ ~ 80℃ wide operating temperature range, suitable for harsh temperature conditions in industrial environment applications.
- All network ports and power ports adopt advanced bridge self-healing multi-stage lightning protection design, which conforms to EN61000-4-2~EN61000-4-6 series international protection standards.
- fully enclosed design, meet the IP40 protection level.
- Electromagnetic compatibility in line with industry level 4 standards, suitable for a variety of harsh electromagnetic environment.
- The use of sunken metal PCB board, with strong oxidation resistance, strong flow capacity, high long-term stability, suitable for harsh environment.
- Dual power supply 1+1 hot backup. Power ports support redundant reverse interconnection.
- Supports multiple network management modes, such as SNMP and Web browser.
- The whole industrial design, using imported industrial chips and devices
DVOP-HM-WR-ELG3-EWG1-DB1-G5WG is a high performance 5G industrial router, based on the requirements of 5G/4G/3G network research and development of excellent wireless communication products. It is mainly used in the data transmission business of industry users, supporting data transparent transmission, image transmission, equipment monitoring and wireless routing Internet access and other functions. It adopts high-performance 32-bit processor, which can process protocols and large amounts of data at high speed, and is compatible with 5G/4G/3G/2G network of China Mobile Unicom Telecom. Provides 10/100M Ethernet port, WIFI wireless interface, serial port. It can connect to various terminal devices. Supports WEB configuration, easy management, and remote SMS control.
DVOP-HM-WR-ELG3-EWG1-DB1-G5WG is a full Netcom 5G antenna interface with 3 10/100/1000M adaptive LAN electrical ports, 1 10/100/1000M adaptive WAN electrical port, 1 RS232/RS485 data, and 1 SMA interface. A multi-functional 5G wireless router with 1200M dual-mode SMA interface and WIFI antenna feed interface, with optional GPS and modular structure. Support 1+1 2 hot spare power input, suitable for -40 ° C ~ 80 ° C harsh temperature conditions of the industrial environment, the use of durable high-strength aluminum housing, the use of fully enclosed design, meet the IP40 protection level. The device supports an extremely wide power supply range of 9V~24V, and the power supply has redundant anti-reverse connection. All interfaces adopt advanced bridge self-healing multi-level lightning protection design, ESD up to 8KV in line with EN61000-4-2 standards, 4KV in line with EN61000-4-5 and other standards, using imported industrial chips and devices, It is not affected by environmental interference, high transmission quality, long-term stable work, installation and maintenance are simple, no need to debug and other characteristics, electromagnetic compatibility meets the industrial level four standards. Widely used in energy, transportation ITS, highways, industrial automation, subways, banks, security monitoring and other requirements of high stability, high reliability, high transmission quality, MTBF long time and other occasions and other industries.
|
Network port indicator |
Physical interface： |
Standard RJ45 |
|
Interface rate： |
10/100/1000MA daptive, full duplex/half duplex |
|
|
Network Mediun |
Category 5 and above unshielded twisted pair |
|
|
Forwarding Mode： |
Store-and-forward, all ports support line-speed forwarding |
|
|
Newwork Protoco： |
IEEE 802.3 ，IEEE 802.3x Flow control， IEEE 802.3z，IEEE 802.3u ，IEEE 802.3ab ，IEEE802.3x |
|
|
Fluid control： |
IEE802.3X/IEE802.3Z Full duplex flow control and half duplex flow control |
|
|
Linear order: |
Adaptive MDI/MDIX direct connection and cross-connection modes |
|
|
2G/3G/4G/5G |
5G |
Mobile 5G (NR)/Unicom 5G (NR)/Telecom 5G (NR) |
|
4G |
Mobile 4G (TD-LTE)/Unicom 4G (TD-LTE/LTE FDD)/Telecom 4G (TD-LTE/LTE FDD) |
|
|
3G |
Unicom 3G (WCDMA)/Telecom 3G (CDMA 2000) |
|
|
2G |
Mobile 2G (GSM)/Unicom 2G (GSM)/Telecom 2G (CDMA 1X) |
|
|
Antenna feeder interface |
4 The root |
|
|
Interface Mode |
SMAAntenna feeder interface |
|
|
WIFI |
Interface： |
SMA |
|
2.4G Transmission Rate: |
300Mbps |
|
|
2.4G Protocol Support ： |
Compatible IEEE 802.11 b/g/n，Support IEEE 802.11 d/h/k |
|
|
5.8G Transmission Rate： |
867Mbps |
|
|
5.8G Protocol Support： |
Compatible IEEE 802.11 a/ac，support IEEE 802.11 d/e/h/i/k/r/w |
|
|
frequency： |
2.4GHz/5.8GHz bimode |
|
|
Secure ： |
WiFi Network Secure Access (WPA), WPA2, 128-bit WEP encryption and supportMAC Address filtering |
|
|
Protocol： |
IEEE 802.11n、IEEE 802.11g、IEEE 802.11b |
|
|
Supply/power |
Power supply mode： |
12VDC |
|
Maximum power consumption： |
<2A@12VDC |
|
|
Environmental parameter |
Operating temperature： |
-40℃ ～+80℃ |
|
Storage temperature： |
-45℃ ～+85℃ |
|
|
Relative humidity： |
5～95% No condensation |
|
|
machine |
Shell ： |
Natural cooling, no fan, IP40 protection |
|
Size： |
182*102*29mm |
|
|
Installation mod： |
wall-mounted |
Software function：
|
1 |
Software function |
Function description |
|
2 |
Working mode |
3G\4G\5G routing mode, standard routing mode and wireless relay mode |
|
3 |
Network backup function |
Support 3G\4G\5G priority wired network backup, wired priority 3G\4G\5G network backup |
|
4 |
HDCP |
DHCP automatically assigns IP addresses and static IP addresses |
|
5 |
Support APN、VPDN Network |
Supports APN/VPN private networks of the three major operators |
|
6 |
VPN |
Supports PPTP clients Support for L2TP clients (IPSECK not currently supported) |
|
7 |
WEB Remote management |
1. Support DMZ hosts 2. Support port mapping 3. Support local 4. Support remote assistance 5. MAC address binding is supported 6. Supports static routing tables |
|
8 |
DTU Feature |
Serial port server Currently, only serial port 232 is supported |
